23.1 - one glass 2mm, the other 3mm, one film between them;
33.1 - two glasses 3mm, one film between them;
44.2 - two glasses 4mm, two films between them
33.1 - two glasses 3mm, one film between them;
44.1 - two glasses 4mm, one film between them;
44.2 - two glasses 4mm, two films between them
TECHNICAL GRINDING - Only the sharp cutting edges of the glass are ground. Technical grinding is definitely necessary when tempering glass.
// POLISHING OR MACHINE GRINDING - Polishing straight edges. Aesthetically beautiful.
// FACET GRINDING - Edge grinding at an angle.
// Machine grinding is always added to the facet grinding on laminated glass.
TECHNICAL GRINDING - Only the sharp cutting edges of the glass are ground. Technical grinding is definitely necessary when tempering glass.
// POLISHING OR MACHINE GRINDING - Polishing straight edges. Aesthetically beautiful.
// FACET GRINDING - Edge grinding at an angle.
// Machine grinding is always added to the facet grinding on laminated glass.
TECHNICAL GRINDING - Only the sharp cutting edges of the glass are ground. Technical grinding is definitely necessary when tempering glass.
// POLISHING OR MACHINE GRINDING - Polishing straight edges. Aesthetically beautiful.
// FACET GRINDING - Edge grinding at an angle.
// Machine grinding is always added to the facet grinding on laminated glass.
TECHNICAL GRINDING - Only the sharp cutting edges of the glass are ground. Technical grinding is definitely necessary when tempering glass.
// POLISHING OR MACHINE GRINDING - Polishing straight edges. Aesthetically beautiful.
// FACET GRINDING - Edge grinding at an angle.
// Machine grinding is always added to the facet grinding on laminated glass.
TECHNICAL GRINDING - Only the sharp cutting edges of the glass are ground. Technical grinding is definitely necessary when tempering glass.
// POLISHING OR MACHINE GRINDING - Polishing straight edges. Aesthetically beautiful.
// FACET GRINDING - Edge grinding at an angle.
// Machine grinding is always added to the facet grinding on laminated glass.
5mm 10mm 15mm 20mm 25mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm
5mm 10mm 15mm 20mm 25mm 30mm 35mm 40mm 45mm 50mm
Holes of different diameters (D) *
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
5-10mm 11-20mm 21-30mm 31-40mm 41-50mm 51-60mm 61-75mm 76-100mm
