33.1 - two glasses 3mm, one film between them;
44.2 - two glasses 4mm, two films between them
33.1 - two glasses 3mm, one film between them;
44.1 - two glasses 4mm, one film between them;
44.2 - two glasses 4mm, two films between them
TECHNICAL GRINDING - Only the sharp cutting edges of the glass are ground. Technical grinding is definitely necessary when tempering glass.
 // POLISHING OR MACHINE GRINDING - Polishing straight edges. Aesthetically beautiful.
 // FACET GRINDING - Edge grinding at an angle.
// Machine grinding is always added to the facet grinding on laminated glass.
TECHNICAL GRINDING - Only the sharp cutting edges of the glass are ground. Technical grinding is definitely necessary when tempering glass.
 // POLISHING OR MACHINE GRINDING - Polishing straight edges. Aesthetically beautiful.
 // FACET GRINDING - Edge grinding at an angle.
// Machine grinding is always added to the facet grinding on laminated glass.
TECHNICAL GRINDING - Only the sharp cutting edges of the glass are ground. Technical grinding is definitely necessary when tempering glass.
 // POLISHING OR MACHINE GRINDING - Polishing straight edges. Aesthetically beautiful.
 // FACET GRINDING - Edge grinding at an angle.
// Machine grinding is always added to the facet grinding on laminated glass.
TECHNICAL GRINDING - Only the sharp cutting edges of the glass are ground. Technical grinding is definitely necessary when tempering glass.
 // POLISHING OR MACHINE GRINDING - Polishing straight edges. Aesthetically beautiful.
 // FACET GRINDING - Edge grinding at an angle.
// Machine grinding is always added to the facet grinding on laminated glass.
TECHNICAL GRINDING - Only the sharp cutting edges of the glass are ground. Technical grinding is definitely necessary when tempering glass.
 // POLISHING OR MACHINE GRINDING - Polishing straight edges. Aesthetically beautiful.
 // FACET GRINDING - Edge grinding at an angle.
// Machine grinding is always added to the facet grinding on laminated glass.
    5mm  10mm  15mm  20mm  25mm  30mm  35mm  40mm  45mm  50mm  55mm  60mm   
    5mm  10mm  15mm  20mm  25mm  30mm  35mm  40mm  45mm  50mm   
Holes of different diameters (D)  * 
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm   
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm   
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm   
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm   
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm   
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm   
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm   
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm   
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm   
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm   
    5-10mm  11-20mm  21-30mm  31-40mm  41-50mm  51-60mm  61-75mm  76-100mm